| Interface Description |
| interface | number | describe | use to |
| PON | 1 | PON fiber optic interface, supporting SC/PC型Optical tail fiber connector. | Used for connecting PON access network optical signals |
| USB | 1 | USB interface | Devices used for connecting USB interfaces |
| LAN1~LAN4 | 4 | RJ-45 Ethernet interface, connected to the local network through this interface,LAN1-LAN4
Adaptive speed of 10/100/1000Mbps. | Connect to a computer, IP phone, or set-top box via Ethernet cable box |
| RESET | 1 | Reset button. After the ONU is powered on, press and hold the reset button for more than 8 seconds, and the device will automatically return to its factory default configuration | Restore factory settings |
| PWR | 1 | DC power adapter interface | Connect the power adapter |
| ON/OFF | 1 | Power switch button | Used to turn on and off devices. ON means the device power is turned on, OFF means the device power is turned off |
|
| pilot lamp |
| illustrate |
| 1 | PWR | Power indicator light | green | Always on: Equipment power supply is normal Extinguish: Abnormal power supply to the device |
| 2 | LOS | Light signal indicator light | red | Always on: PON port optical module power off Blinking: The received light power is lower than the sensitivity of the light receiver Extinguish: The received light power is normal |
|
|
|
| 3 | PON | ONU registration indicator light | green | Always on: Registered to OLT device normally Flashing: During registration with OLT device Off: Registration to OLT failed or no normal optical signal input |
| 4 | 2.4G | WIFI signal indicator light | green | Always on: WIFI function activated Blinking: WIFI has data transmission Turn off: WIFI function is turned off |
| 5 | 5G | WIFI signal indicator light | blue | Always on: WIFI function activated Blinking: WIFI has data transmission Turn off: WIFI function is turned off |
| 6 | NET | Internet signal indicator light | green | Always on: The external network is connected Extinguished: External network not connected |
| 7 | LAN1~4 | Network port working status indicator light | green | Always on: Port connection is normal but there is no data transmission Flashing: Port connection is normal and there is data transmission Extinguished: Port has no connection or abnormal connection |
| 8 | TEL | Telephone port status indicator light | green | Always on: The phone has been registered to the SIP server. Blinking: Phone registered and voice data transfer (ACT) Extinguished: Phone not registered or registration unsuccessful |
| Technical Parameter |
| project | parameter | specifications |
| Interface specifications | PON interface | 1 PON interface GPON: upstream 1.244Gbps rate, downstream 2.488Gbps rate |
| SC single-mode single fiber transmission distance: 20KM |
| WLAN interface | 2.4GHz（channel 1～13） 300Mbps |
|
| 5.8GHz （4 channels） 867Mbps |
| user port | 4 10/100/1000M adaptive Ethernet ports Full duplex/half duplex RJ45 electrical port, supporting cross direct adaptive connection Transmission distance of 100 meters |
Power interface Telephone interface | 12V DC power supply interface RJ11 voice interface |
| Performance specifications | PON optical port performance | Wavelength: 1290-1600 Transmitting optical power: 0-4dBm Receiver sensitivity: -27dBm Saturated optical power: -3ddB |
| Data transmission performance | WLAN：1200Mbps Ethernet port: 100Mbps or 1000Mbps Packet loss rate:<1 * 10E-12 Transmission delay:<1.5ms |
| Business Capability | Second layer line speed exchange Support VLAN TAG/UNTAG, VLAN conversion Support port speed limit Support business prioritization Support broadcast packet suppression Support loop detection |
| equipment management | management style | In addition to supporting RMS remote management and configuration requirements, it also supports OMCI or EMS remote management and configuration requirements for OAM |
| management function | Status monitoring, configuration management, alarm management, log management |
| Special performance | housing | White plastic shell |
| Power supply and power consumption | <10W 12V/1.5A power adapter |
| Size and weight | Equipment size: 239mm × 152mm × 38mm (L × W × H) Equipment weight: 0.6kg |
| Environmental parameters | Working temperature: 0-50 ℃ Storage temperature: -10~75 ℃ Working humidity: 10% to 90% non condensing Storage humidity: 10% to 90% non condensing |
| WIFI Key technical indicators |
| Standards and Protocols | IEEE 802. 11 ac/b/g/n |
| WiFi parameters | frequency | 2.4~2.4835GHz |
| 5GHz: Low frequency, mid frequency, high frequency | 5. 15GHz～5.25GHz、
5.25GHz～5.35GHz、
5.725GHz～5.825GHz |
| transfer rate | 2.4GHz Frequency:
IEEE 802. 11b: 11/5.5/2/1M(Auto) |
|
| IEEE 802. 11g: 54/48/36/24/18/12/9/6(Auto)
IEEE 802. 11n: 270/243/216/162/108/81/54/27Mbps,up to 300Mbps |
|
5GHz Frequency:
IEEE 802. 11n: Highest transmission speed up to 300Mbps
IEEE 802. 11ac: Highest transmission speed up to 867Mbps |
|
| operating channel | 2.4GHz : 13 5GHz:4 |
|
| Exhibition frequency technology | DSSS(Direct sequence spread spectrum) |
|
| data modulation | DBPS, DQPSK, CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM) |
|
| Sensitivity @ PER (packet error rate) | 270M：-68dBm@10% PER；130M： -68dBm@10% PER；
108M：-68dBm@10% PER；54M：-68dBm@10% PER
11M：-85dBm@8% PER；6M：-88dBm@10% PER
1M：-90dBm@8% PER； |
|
| antenna | 5dBi high gain omnidirectional antenna |
|
